Part Number Hot Search : 
TPSMP24A DPJCZFH ALS04 RF1510 D5668 709CP 23600 IN80C541
Product Description
Full Text Search
 

To Download HMCC049 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 HMC-C049
v00.0808
GaAs MMIC FUNDAMENTAL MIXER, 7 - 14 GHz
Features
Passive Double Balanced Topology High LO/RF Isolation: 48 dB Low Conversion Loss: 7 dB Wide IF Bandwidth: DC - 5 GHz Robust 1,000V ESD, Class 1C
Typical Applications
Hermetic Module
5
MIXERS
The HMC-C049 is ideal for: * Point-to-Point Radios * Point-to-Mulit-Point Radios * Test Equipment & Sensors * Military End-Use
General Description
The HMC-C049 is a 7 - 14 GHz double balanced mixer which provides a low conversion loss, high isolation, and a wide IF bandwidth. This mixer does not require a DC bias and can operate with an LO power level of +9 dBm. The package is a hermetically sealed module that is assembled and tested to meet MIL-883-STD qualifications. This product comes standard with three female SMA field replaceable connectors that can also be intercharged with blind mate SMP connectors or detached to allow direct connection of the I/O Pins to a microstrip or coplaner circuit.
Functional Diagram
Electrical Specifi cations, TA = +25 C, IF= 100 MHz, LO= +13 dBm*
Parameter Frequency Range, RF & LO Frequency Range, IF Conversion Loss Noise Figure (SSB) LO to RF Isolation LO to IF Isolation RF to IF Isolation IP3 (Input) IP2 (Input) 1 dB Compression (Input) 37 27 12 Min. Typ. 7 - 11 DC - 5 7 7 48 35 22 18 48 11 35 32 22 9.5 Max. Min. Typ. 11 - 14 DC - 5 8 8 45 40 30 20 47 12 11 Max. Units GHz GHz dB dB dB dB dB dBm dBm dBm
*Unless otherwise noted, all measurements performed as downconverter, IF= 100 MHz.
5 - 64
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com
HMC-C049
v00.0808
GaAs MMIC FUNDAMENTAL MIXER, 7 - 14 GHz
Conversion Gain vs. Temperature @ LO = +13 dBm
-4
Isolation @ LO = +13 dBm
-10
RF/IF LO/RF LO/IF
CONVERSION GAIN (dB)
-6 ISOLATION (dB)
+25C +85C -55C
-20
-30
-8
-40
-10
-50
-12 6 7 8 9 10 11 12 13 14 15 FREQUENCY (GHz)
-60 6 7 8 9 10 11 12 13 14 15 FREQUENCY (GHz)
5
MIXERS
Conversion Gain vs. LO Drive
-4
Return Loss @ LO = +13 dBm
0
CONVERSION GAIN (dB)
RETURN LOSS (dB)
-6
-5
-10
-8
+9 dBm +11 dBm +13 dBm +15 dBm +17 dBm
-15
-10
-20
RF LO
-12 6 7 8 9 10 11 12 13 14 15 FREQUENCY (GHz)
-25 6 7 8 9 10 11 12 13 14 15 FREQUENCY (GHz)
IF Bandwidth @ LO = +13 dBm
0
Upconverter Performance Conversion Gain vs. LO Drive
-4
RESPONSE (dB)
-5
CONVERSION GAIN (dB)
-6
-10
-8
+9 dBm +11 dBm +13 dBm +15 dBm +17 dBm
-15
IF Return Loss Conversion Gain
-10
-20 0 1 2 3 4 5 6 FREQUENCY (GHz)
-12 6 7 8 9 10 11 12 13 14 15 FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com
5 - 65
HMC-C049
v00.0808
GaAs MMIC FUNDAMENTAL MIXER, 7 - 14 GHz
Input IP3 vs. Temperature @ LO = +13 dBm *
30
+9 dBm +11 dBm +13 dBm +15 dBm +17 dBm
Input IP3 vs. LO Drive *
30
25 IP3 (dBm)
25 IP3 (dBm)
+25C +85C -55C
20
20
15
15
5
MIXERS
10 6 7 8 9 10 11 12 13 14 15 FREQUENCY (GHz)
10 6 7 8 9 10 11 12 13 14 15 FREQUENCY (GHz)
Input IP2 vs. LO Drive *
70
+9 dBm +11 dBm +13 dBm +15 dBm +17 dBm
Input IP2 vs. Temperature @ LO = +13 dBm *
70
60 IP2 (dBm)
60 IP2 (dBm)
+25C +85C -55C
50
50
40
40
30 6 7 8 9 10 11 12 13 14 15 FREQUENCY (GHz)
30 6 7 8 9 10 11 12 13 14 15 FREQUENCY (GHz)
Input P1dB vs. Temperature @ LO = +13 dBm
14 13 12 11 10 9 8 6 7 8 9 10 11 12 13 14 15 FREQUENCY (GHz)
P1dB (dBm)
+25C +85C -55C
* Two-tone input power = -10 dBm each tone, 1 MHz spacing.
5 - 66
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com
HMC-C049
v00.0808
GaAs MMIC FUNDAMENTAL MIXER, 7 - 14 GHz
Absolute Maximum Ratings
RF / IF Input LO Drive Channel Temperature Continuous Pdiss (T = 85 C) (derate 2.75 mW/C above 85 C) Thermal Resistance (channel to ground paddle) Storage Temperature Operating Temperature ESD Sensitivity (HBM) +25 dBm +25 dBm 150 C 178 mW 364 C/W -65 to +150 C -55 to +85 C Class 1C
MxN Spurious Outputs
nLO mRF 0 1 2 3 4 0 xx 23 88 97 >120 1 11 0 86 92 >120 2 36 37 61 93 >120 3 24 37 80 71 >120 4 39 60 89 91 111
RF = 10.1 GHz @ -10 dBm LO = 10 GHz @ +13 dBm All values in dBc below the IF output power level.
5
4 85 99 71 75 75 76 74 xx xx xx
nLO
ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS
LO Freq. (MHz) 5.9 6.9 7.9 8.9 9.9 10.9 11.9 12.9 13.9 14.9
1 47 95 44 44 44 47 48 47 42 39
2 40 45 37 41 46 51 52 54 57 59
3 56 60 64 68 72 62 58 59 60 61
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com
5 - 67
MIXERS
HMC-C049
v00.0808
GaAs MMIC FUNDAMENTAL MIXER, 7 - 14 GHz
Outline Drawing
5
MIXERS
NOTES:
Package Information
Package Type Package Weight [1] Spacer Weight [1] Includes the connectors [2] 1 gms Tolerance C-11 20 gms [2] 2.6 gms [2]
1. PACKAGE, LEADS, COVER MATERIAL: KOVARTM 2. FINISH: GOLD PLATE OVER NICKEL PLATE. 3. MOUNTING SPACER NICKEL PLATED ALUMINUM. 4. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. TOLERANCES: 5.1 .XX = .02 5.2 .XXX = .010 6. MARK LOT NUMBER ON 0.080 X 0.250 LABEL WHERE SHOWN, WITH 0.030" MIN TEXT HEIGHT. 7. MOUNTING SPACER PART NUMBER 109812.
5 - 68
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com
HMC-C049
v00.0808
GaAs MMIC FUNDAMENTAL MIXER, 7 - 14 GHz
Pin Descriptions
Pin Number Function Description Interface Schematic
1
LO
This pin is DC coupled and matched to 50 Ohms.
2
IF
This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source or sink more than 2 mA of current or part non-function and possible part failure will result.
5
MIXERS
5 - 69
3
RF
This pin is DC coupled and matched to 50 Ohms.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com


▲Up To Search▲   

 
Price & Availability of HMCC049

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X